NEW carb on muggello 186

[thebassmasta]

going to put a new carb on the scoot before she goes on the road,but cant make up mind, im sticking with dellorto though.
186 muggello tweeked by mr barlow
taffspeed copy pipe
Just want a reliable/quick rally going scoot
What are peoples thoughts?
choice of carbs are:

PHBH 26mm

PHBH 30mm

VHST 26mm

VHST 28mm

VHSA 30mm

[Timbo]

Got a 22 delly on my 200 muggy and it runs fine. Think I would go for a 26 from your choice.

[thebassmasta]

what pipe you running?
26mm PHBH or VHST??

[simonwwfc]

I'm running 28mm dellorto with sterling pipe runs awesome

[Donnie]

Running a 30PHBH, ram air filter and a 48mm clubman here.

[Supereibar]

Doing a Muggy for a client, is anyone running a 25PHBL? I want to run it through the airbox...

[sideout]

Not in your list, but a Mikuni TM24 through the airbox with a clubman is sweet; alternatively is great fun with a Ram Air and JL3 both on Mugello 186s.

[thebassmasta]

i am running a taffspeed copy, so my purchase of carb has to go with this pipe.
and i dont really want an airbox either, prefer a ram air filter
never had a scoot with a standard pipe, always had an expansion

[thebassmasta]

Not in your list, but a Mikuni TM24 through the airbox with a clubman is sweet; alternatively is great fun with a Ram Air and JL3 both on Mugello 186s.

who sells TM24s? and would also need cable choke. do you have any idea on the jetting running a ram air and jl3 pipe?

[Donnie]

i am running a taffspeed copy, so my purchase of carb has to go with this pipe.
and i dont really want an airbox either, prefer a ram air filter
never had a scoot with a standard pipe, always had an expansion

Before I had the 48mm clubby I was running a jl3 and beofre that the Taffy copy still on the 30phbh