28mm PHBH
-
DazzerLancs
- registered user
- Posts: 13
- Joined: Sun Apr 26, 2009 9:18 pm
- Location: Colne, Lancs
- Contact:
Hello folks, after trying unsuccessfully to get two jetex carbs to work on my SIL GP200 motor I have admitted defeat. I have been given a 28mm PHBH carb off a friend, it was on his Mugello 186. What manifold will I need and can anyone advise as to what jetting this should roughly have? It is standard apart from a sterling exhaust. Many thanks.