Scooterotica

Has anyone tried these are they any good

Yep, I have them on both my scoots and I'll never go back to the original bend the cable kerfuffle. These ones are so much easier to adjust. Only thing I'd recommend is to change the nyloc nut every know and then, maybe once a year, as they lose their "gripping" powers after they've been adjusted a few times.

storkfoot wrote:Yep, I have them on both my scoots and I'll never go back to the original bend the cable kerfuffle. These ones are so much easier to adjust. Only thing I'd recommend is to change the nyloc nut every know and then, maybe once a year, as they lose their "gripping" powers after they've been adjusted a few times.

agreed... fit one, you won't be dissapointed

they are very good. Re the nylok, I slip the original brass adjuster on as well.

Recommended

Chris

Definately worth it.

Excellent im off to buy 1, thanks for the feedback

PM me if you want one. I reckon I've sold 500, and never had one returned.

The best thing about them is the way it speeds-up the process of dropping then engine: take the nut off, and pull the inner and outer straight out the back of the crankcase.

Martin

BIT LATE - BUT I`VE GOT THEM ON ALL MY 3 BIKES - EXCELLENT

As Tony the Tiger would say....." They're greaaaaaaaaat".

Ive just fitted one :bouncyeng: :bouncyeng: :bouncing: :bouncing: :smug:

God a back brake that is fully adjustable and actually works .

Cheers martin no problems easy to fit and adjust