Page 1 of 1
Decent quality GP/ SX kick start pedal.
Posted: Sat Dec 22, 2012 3:54 pm
by 10 inch Terror
Hi all, as the title says please. I'm currently using one from a well know Viet company and the splines don't line up with the shaft. Where can i get a decent one from? Not worried if its not original but, must be quality. Thanks in advance Pete.
Re: Decent quality GP/ SX kick start pedal.
Posted: Sat Dec 22, 2012 4:50 pm
by fred
genuine indian normally ok,try scooter restorations.
Tho' i've had this before twice,first it was kickstart,2nd was dodgy re made kickstart ramp.
scoot rs ones normally ok too.
Re: Decent quality GP/ SX kick start pedal.
Posted: Sat Dec 22, 2012 7:14 pm
by dom
Cambridge do a SX200 copy made by Evergreen , Tino ? It's very good in my opinion
Re: Decent quality GP/ SX kick start pedal.
Posted: Sun Dec 23, 2012 7:18 am
by 10 inch Terror
dom wrote:Cambridge do a SX200 copy made by Evergreen , Tino ? It's very good in my opinion
Yeah, I've seen those but, don't really want to spend £50. I think, I'll just go with a genuine SIL one from SR. Cheers Guys.
Re: Decent quality GP/ SX kick start pedal.
Posted: Sun Dec 23, 2012 12:57 pm
by storkfoot
I have a Cam Lam SX one and I shall be buying another after Christmas too. I've also had the SR Indian ones in the past which, whilst better than the Vietnamese ones, were still not a good fit on the splines and, in my case, cracked.
Personally I'd either get an old one re-chromed, or buy the CamLam one. The problem with old original ones is you don't know their history. If they've been bent by having been dragged along the road in a crash, you won't know until you fit it unfortunately.