Scooterotica

have a 63 tv175 needing a new piston but genuine tv pistons seem thin on the ground, i ordered a vertex off camlam but when it came it was a 3 ring piston{minus gugeon pin n rings!}, would i be better off with an indian made 2 ring or stick with this 3 ring, bikes more or less standard and i dont intend tuning it or changing the crank to use a conversion piston
thanks
dave

using one of these:-

http://www.scooterrestorations.com/lamb ... 4mm-mahle/

absolutely no problems for a standard engine

Chris

hi chris
tanks for that but sadly its a 62.6mm im needing

Suzuki TS185 Piston?