have a 63 tv175 needing a new piston but genuine tv pistons seem thin on the ground, i ordered a vertex off camlam but when it came it was a 3 ring piston{minus gugeon pin n rings!}, would i be better off with an indian made 2 ring or stick with this 3 ring, bikes more or less standard and i dont intend tuning it or changing the crank to use a conversion piston
thanks
dave
piston advice
-
dave wheeler
- registered user
- Posts: 214
- Joined: Fri Feb 19, 2010 5:33 pm
- Contact:
-
bristolmod
- registered user
- Posts: 1741
- Joined: Wed Jan 07, 2009 8:42 am
- Main scooter: Lambretta TV175 S3- what else!
- Location: Bali-Hai bar, Locarno Ballroom Bristol, 1967!- mines a Brown Split!!
- Contact:
using one of these:-
http://www.scooterrestorations.com/lamb ... 4mm-mahle/
absolutely no problems for a standard engine
Chris
http://www.scooterrestorations.com/lamb ... 4mm-mahle/
absolutely no problems for a standard engine
Chris
Scootering since 1968.
-
dave wheeler
- registered user
- Posts: 214
- Joined: Fri Feb 19, 2010 5:33 pm
- Contact:
hi chris
tanks for that but sadly its a 62.6mm im needing
tanks for that but sadly its a 62.6mm im needing
-
Spanish Fly
- registered user
- Posts: 198
- Joined: Tue Nov 30, 2010 1:23 pm
- Main scooter: P200e
- Contact:
Suzuki TS185 Piston? 