Page 1 of 1
How to differentiate between JL pipes?
Posted: Tue Apr 21, 2009 9:25 pm
by mawso
I have a JL 4 pipe which is easily identified by the snakey u-bend. But I've also got another JL...which I cannot tell if it is a 1, 2 or 3.
Is there a way to identify it? As it doesn't appear to be marked up in any way.
Re: How to differentiate between JL pipes?
Posted: Wed Apr 22, 2009 1:55 am
by corrado
The JL1 is easily identified as it is 4 pieces as opposed to 3 for the others. Stub manifold, down pipe, main body, end can.
JL2, 3, 4 have stub manifold, main body, end can. JL1 is about the same size as JL2, main body is smaller/thinner than JL3 & 4.
There's pictures of all 4 on my website. You should be able to compare where the sections are on yours compared to the pictures.
Re: How to differentiate between JL pipes?
Posted: Wed Apr 22, 2009 9:55 pm
by mawso
Many thanks that's great. I think mine is a JL 2 then...damn I wanted the 3 that's based on the Taffy!
Re: How to differentiate between JL pipes?
Posted: Wed Apr 22, 2009 10:31 pm
by corrado
Run a tape around your ?? at the fattest part and post the measurement.
Re: How to differentiate between JL pipes?
Posted: Wed Apr 22, 2009 10:34 pm
by drunkmunkey6969
Re: How to differentiate between JL pipes?
Posted: Wed Apr 22, 2009 10:40 pm
by sean brady scooters
nice one........
i had visions there of stu going to the bedroom with a porno mag and a tape measure.............
Re: How to differentiate between JL pipes?
Posted: Wed Apr 22, 2009 10:46 pm
by corrado
That edit button comes in useful now n then.
Re: How to differentiate between JL pipes?
Posted: Thu Apr 23, 2009 12:54 pm
by RinB
Yes It is quite good :baddevil: :baddevil: :baddevil:
Re: How to differentiate between JL pipes?
Posted: Thu Apr 23, 2009 5:20 pm
by corrado
Oi !! :shocking:
