coast to coast engine spec
Posted: Mon Sep 17, 2012 7:22 pm
apart from the 5 speed box used in sticky,s bike is there any information on the motor spec?
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
coast to coast engine spec
Page 1 of 1
Re: coast to coast engine spec
Posted: Mon Sep 17, 2012 9:41 pm
was it reed valved?
Re: coast to coast engine spec
Posted: Mon Sep 17, 2012 9:48 pm
30mm PHBH powerjet into LTH reed
Rapido 225 with modified Asso piston ported by Darrell Taylor
Avanti cylinder head and cowling
AF NK Rally exhaust (too bloody loud!)
Casa Lambretta ignition
BGM 58 stroke crank 110mm rod
AF Road 6-plate cassette clutch
RLC DRT Cyclone 5-speed
Underpants with a picture of Popeye on (not the one from Leeds!)
Approx 23hp
Rapido 225 with modified Asso piston ported by Darrell Taylor
Avanti cylinder head and cowling
AF NK Rally exhaust (too bloody loud!)
Casa Lambretta ignition
BGM 58 stroke crank 110mm rod
AF Road 6-plate cassette clutch
RLC DRT Cyclone 5-speed
Underpants with a picture of Popeye on (not the one from Leeds!)
Approx 23hp
Re: coast to coast engine spec
Posted: Mon Sep 17, 2012 9:52 pm
You missed out the most important bit ! ............ psycho pilot !!Speed Demon wrote:30mm PHBH powerjet into LTH reed
Rapido 225 with modified Asso piston
Avanti cylinder head and cowling
AF NK Rally exhaust (too bloody loud!)
Casa Lambretta ignition
BGM 58 stroke crank 110mm rod
AF Road 6-plate cassette clutch
RLC DRT Cyclone 5-speed
Underpants with a picture of Popeye on (not the one from Leeds!)
Approx 23hp
Re: coast to coast engine spec
Posted: Mon Sep 17, 2012 9:55 pm
ok cheers.....interesting,an avanti head only....thats a new twist i havnt heard of....and yes if the nk rally is anything like my chisel rally i can vouch their LOUDSpeed Demon wrote:30mm PHBH powerjet into LTH reed
Rapido 225 with modified Asso piston
Avanti cylinder head and cowling
AF NK Rally exhaust (too bloody loud!)
Casa Lambretta ignition
BGM 58 stroke crank 110mm rod
AF Road 6-plate cassette clutch
RLC DRT Cyclone 5-speed
Underpants with a picture of Popeye on (not the one from Leeds!)
Approx 23hp
Re: coast to coast engine spec
Posted: Mon Sep 17, 2012 10:57 pm
You can buy the head/cowl separate from Ron.....they fit any 70mm bore. More fin area, cooooooooool. ;o)camel wrote:ok cheers.....interesting,an avanti head only....thats a new twist i havnt heard of....