Page 1 of 1
TS1 cylinder Head
Posted: Mon Sep 03, 2012 2:28 pm
by Hotdog
What's the difference between an TS1 225 cylinder head and a 225 cylinder head off an cast iron cylinder ?
Re: TS1 cylinder Head
Posted: Mon Sep 03, 2012 3:23 pm
by handofdave
head needs to be profiled to suit the piston used so dont be fooled into buying an off the shelf item, get one machined to suit your piston profile and desired cr ,
Re: TS1 cylinder Head
Posted: Thu Sep 06, 2012 1:40 pm
by Special X
Or buy an AF head and use an Asso piston and the profile will be right.
Re: TS1 cylinder Head
Posted: Thu Sep 06, 2012 3:34 pm
by handofdave
Special X wrote:Or buy an AF head and use an Asso piston and the profile will be right.
i beg to differ as the heads i have had from af definately didnt match the profile of the asso pistons
Re: TS1 cylinder Head
Posted: Thu Sep 06, 2012 4:33 pm
by gaz_powell
My choice is always (on 6 TS1 rebuild now) to have a SIL 200 or AF modified by someone who know what they are doing - my choice been Chiselspeed or MB