TS1 245 38bhp / 26.14 ft.lbs

Post your Lambretta dyno graphs here! But graphs & spec info only, keep the chat in the 'dyno chat' section ;o)
Darrell Taylor
Dealer
Posts: 752
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

Heres a dyno graph of a ts1245 ive dynoed today
running on
one of my cylinder tunes
and modified heads
62/116 crank 71 bore
fran race
35mikuni
vf3

38bhp / 26.14 ft.lbs
Image
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
ebay user ID: sc00terotica
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Absolutely cracking result there Darrell.

Did you shorten the tuned length of the pipe to accomodate the over-rev to 9k?
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
tonydevon
registered user
Posts: 553
Joined: Wed Jun 08, 2011 12:26 pm
ebay user ID: tony-ac-racing
Main scooter: '71 GP125
Location: Northam, Devonshire
Contact:

BLIMEY, crackin result
heavy is good, heavy is reliable, and if it does fail, hit them with it!!!
User avatar
Andy Pickering
registered user
Posts: 2172
Joined: Sun Jan 25, 2009 10:15 pm
ebay user ID: picknik777
Main scooter: GP
Location: Hull
Contact:

Bleeding nora :o..gis a go..please.

Sent from my GT-I9300 using Tapatalk 2
Ricspeed, gone but never forgotten RIP my friend #59
WINTERMODEL150
registered user
Posts: 436
Joined: Sun Oct 17, 2010 5:31 pm
ebay user ID: wintermodel150
Main scooter: lambretta ld auto
Contact:

Well done Darrell cracking result again :D

Dean
Yanker
registered user
Posts: 576
Joined: Thu Jan 21, 2010 10:56 pm
Contact:

That graph looks absolutely 'top-tastic'...the torque figure! :frog:

Darrell, do you think it would be realistic to do a 'similar' (de)tune, shifting the power delivery 1k down without sacrificing more than 5 BHP and 4ft.lbs. ?

Anyway: Gratulations!

Andy
Darrell Taylor
Dealer
Posts: 752
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

drunkmunkey6969 wrote:Absolutely cracking result there Darrell.

Did you shorten the tuned length of the pipe to accomodate the over-rev to 9k?
ta.
no its a standard pipe,ive played with tuned length before but moves the rpm that it comes onto pipe up from the regular 5400 to near 6k which leaves the gearbox struggling
its also on straight line ignition
its 9k overrev is often seen on most motors but nosediving ,not holding on like this does
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924
Darrell Taylor
Dealer
Posts: 752
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

Yanker wrote:That graph looks absolutely 'top-tastic'...the torque figure! :frog:

Darrell, do you think it would be realistic to do a 'similar' (de)tune, shifting the power delivery 1k down without sacrificing more than 5 BHP and 4ft.lbs. ?

Anyway: Gratulations!

Andy
moving power down is fairly easily done torque would actually go up and power drop a few
but this motor sits in top at 30mph and pulls away clean as, pulling from 5000-5500 is about the usable limit of the 4 speed box so as long as you tune to that and gear appropriately you get a nice motor
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
ebay user ID: sc00terotica
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Darrell Taylor wrote:....but this motor sits in top at 30mph and pulls away clean as, pulling from 5000-5500 is about the usable limit of the 4 speed box......
What gearing are you running? Wouldn't 5500rpm be circa 50-55mph?
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Muppet
registered user
Posts: 1268
Joined: Thu Sep 16, 2010 9:54 pm
Main scooter: SX 150 running in

I read it twice before I got it I think he's saying when it's sitting at 30 it feels like another motor would a 5500 and pulls away as it would if doing 5500 revs but In reality it's pulling less than 3000 but moves away just as easily,
muppet,
C’est la vie
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 0 guests

cron