Gents,
Just built me a proper ratbike with a Malossi 210 reed engine. Modified Malle210, Worb5 crank, Malossi reed and a PHBH 30. And a PM Up'n Over...
Any advis of seting the carb for this?
I have;
Idle: 55
Needle: X2 on top clip
Main jet 135.
It goes well on low rpms, but higher up it splutters.
-thought it was flywheel side seal, but that's perfect.
Any tips on the carb?
Ø
Malossi 211 with PM Up'n Over -need help
President of Roughnecks Scooterclub
http://www.Roughnecks.no
1965 Vespa SS180 (218)
1971 Vespa 90 Racer
1986 Vespa PX250 (250 Rotax on CNC casings)
1987 Vespa PX210 with Cozy Sidecar
http://www.Roughnecks.no
1965 Vespa SS180 (218)
1971 Vespa 90 Racer
1986 Vespa PX250 (250 Rotax on CNC casings)
1987 Vespa PX210 with Cozy Sidecar
-
drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
What atomiser? Try AV266 and X13 needle on 2nd clip.....
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
drunkmunkey6969 wrote:What atomiser? Try AV266 and X13 needle on 2nd clip.....
Thanks!
I'll try that!
President of Roughnecks Scooterclub
http://www.Roughnecks.no
1965 Vespa SS180 (218)
1971 Vespa 90 Racer
1986 Vespa PX250 (250 Rotax on CNC casings)
1987 Vespa PX210 with Cozy Sidecar
http://www.Roughnecks.no
1965 Vespa SS180 (218)
1971 Vespa 90 Racer
1986 Vespa PX250 (250 Rotax on CNC casings)
1987 Vespa PX210 with Cozy Sidecar