TS1 225 - Scooterotica ported cylinder
MB piston
Tassinari V-force Reeds
Franspeed Race Pipe
34mm Delly
6 plate Clutch
Li150 Gearbox 16/47
No welding or crankcase porting.
33.2bhp @ 8100rpm
23.5 ft-lbs @ 6900rpm
Might play with the pipe length on this one and adjust peak BHP up another 250-500rpm, should sit around 35bhp then.
TS1225 - 33bhp
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
-
- Dealer
- Posts: 752
- Joined: Wed Apr 06, 2011 8:43 am
- Main scooter: LAMBRETTA
- Location: Doncaster
- Contact:
well done dan good result
is this the one you put pics up of recently,what stroke/rod is it
is this the one you put pics up of recently,what stroke/rod is it
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924
https://www.facebook.com/pages/Taylor-T ... 8819767924
A little cheaper than a Super Monza too I guess?
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Im guessing its the yellow peril ??
Ricspeed, gone but never forgotten RIP my friend #59
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
Darrell - no, not posted pics of this particular cylinder etc yet.
Stokie - Aye, it worked out a bit cheaper on this project....lol.
Andy - sort of, its a long story....various engines are currently being built, swapped, changed etc....nothing stays the same for too long.
Stokie - Aye, it worked out a bit cheaper on this project....lol.
Andy - sort of, its a long story....various engines are currently being built, swapped, changed etc....nothing stays the same for too long.
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
Not yet, but will try a 30mm phbh eventually.Muppet wrote:have you tried the same tune with a smaller carb just out of interest,
muppet,
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos