Page 1 of 2
which sidestand for a Lambretta?
Posted: Wed Apr 15, 2009 5:44 pm
by simon k
to get around some exhaust clearance issues i'm going to fit a sidestand. the frame is already painted so ideally it will involve no welding.
what type are you running?
Re: which sidestand for a Lambretta?
Posted: Wed Apr 15, 2009 7:50 pm
by Fireman Ash
Which exhaust have you got buddy? I had nightmares with an AF 42mm from Rayspeed on my spanish Ser.80 Jet which I ended up selling on. Took stand off and dry bent very carefully, enough to clear a new Ancillotti sito which was ever so slightly narrower....I considered a side stand but only the ones that you can bolt onto the existing stand to avoid drilling the legshields. Good luck!!
Cheers
Ash
Re: which sidestand for a Lambretta?
Posted: Thu Apr 16, 2009 12:40 am
by simon k
i have franspeed race on a rb25 3mm packing plate.
are the scootrs one's any good?
Re: which sidestand for a Lambretta?
Posted: Thu Apr 16, 2009 7:24 am
by Dazza
I had to finely fettle a scootrs with a lump hammer to get it clear my rear strut when fitted to a mugello
It was impossible to fit with the standard barrel, maybe just a bad one?
Re: which sidestand for a Lambretta?
Posted: Thu Apr 16, 2009 10:00 am
by simon k
hmm...
Re: which sidestand for a Lambretta?
Posted: Thu Apr 16, 2009 10:22 am
by Dryballs
Re: which sidestand for a Lambretta?
Posted: Thu Apr 16, 2009 11:24 am
by RBG
Re: which sidestand for a Lambretta?
Posted: Thu Apr 16, 2009 12:41 pm
by simon k
thanks Christian watching that one.
coming for a spin sunday?
Re: which sidestand for a Lambretta?
Posted: Thu Apr 16, 2009 1:28 pm
by shocky
really you need to streanghten the strut with these stands or fit them to the rear one
Re: which sidestand for a Lambretta?
Posted: Thu Apr 16, 2009 4:59 pm
by simon k
has any one got pictures of one fitted with a strengthened strut?
