Page 1 of 1
px rear disc
Posted: Thu Jul 05, 2012 9:27 pm
by ducksta
any one fitted a px out board disc any down falls, price, fitment etc
Re: px rear disc
Posted: Fri Jul 06, 2012 12:27 am
by goldeneye
ducksta wrote:any one fitted a px out board disc any down falls, price, fitment etc
why bother? the back brake on a PX can be made to lock up easily.if its for looks only.............
Re: px rear disc
Posted: Fri Jul 06, 2012 10:34 pm
by ducksta
just by adjustment or any secret tips
Re: px rear disc
Posted: Fri Jul 06, 2012 11:10 pm
by red
ducksta wrote:any one fitted a px out board disc any down falls, price, fitment etc
If ya really want one have a word with Daz Kane on here as he's got one on his T5
Re: px rear disc
Posted: Sat Jul 07, 2012 7:37 am
by LI150
goldeneye wrote:ducksta wrote:any one fitted a px out board disc any down falls, price, fitment etc
why bother? the back brake on a PX can be made to lock up easily.if its for looks only.............
Agree why bother the back brake is good on a PX.
Re: px rear disc
Posted: Mon Jul 09, 2012 10:35 pm
by OzOAP
Got SIP outboard disc set-up on my TS1.
Had it about 7 years.
Disc didn't run true when I got it, so had to modify it slightly on lathe.
Had no problems since.
Running a SIP pedal with a 12mm bore cylinder (unknown origin). Brake light is of a hydraulic switch in place on banjo bolt on caliper.
