Scooterotica

Hi I'm going to be running a JL3 on my TS1 in my ser. 1. I have bought the SLJ exhaust support. I now need to make a suitable bracket to join the can to the main SLJ bracket. What have people made for this? Pics would be great.
Thanks

sorry, not got any pics but I thought the JL had a brkt fixed to the tail pipe an Scooter Loopy's had a bobbin that fixed to the tail-can brkt.

Well that could very well be the case! I have never had either before so....

MB's Devtour rear support bracket fits perfect to the JL3, with nothing else needed. The bracket also as the advantage of picking 4 of the chaincase side studs up and is fastened flush to the side, not hung out on long bolts.

hydra wrote:MB's Devtour rear support bracket fits perfect to the JL3, with nothing else needed. The bracket also as the advantage of picking 4 of the chaincase side studs up and is fastened flush to the side, not hung out on long bolts.

Any pics mate ?

Toddy wrote:

hydra wrote:MB's Devtour rear support bracket fits perfect to the JL3, with nothing else needed. The bracket also as the advantage of picking 4 of the chaincase side studs up and is fastened flush to the side, not hung out on long bolts.

Any pics mate ?

Try this:

http://www.lambrettaspares.com/spares/e ... 0793k.html


John

Minority wrote:

Toddy wrote:

hydra wrote:MB's Devtour rear support bracket fits perfect to the JL3, with nothing else needed. The bracket also as the advantage of picking 4 of the chaincase side studs up and is fastened flush to the side, not hung out on long bolts.

Any pics mate ?

Try this:

http://www.lambrettaspares.com/spares/e ... 0793k.html


John

Cheers fella