Scooterotica

Just finished building my reed valve Mugello'd SX186.
Fitted a 5-plate clutch but the problem is, when the engine gets hot, it drags??????
Also wants to jump out of gear every now and then??????

Any advice welcome.


Gazza

to add has said sproket been opened out to clear the bottom plate tabs ?

Scootissimo wrote:Just finished building my reed valve Mugello'd SX186.
Fitted a 5-plate clutch but the problem is, when the engine gets hot, it drags??????
Also wants to jump out of gear every now and then??????

Any advice welcome.


Gazza

Mine did that...I replaced the springs that was in it for MB ones....never had the problem since