Scooterotica

I recently saw on a website (possibly this one) a sectional drawing of a Clubman exhaust that showed what was effectively an expansion pipe curled up inside the box.

Does anyone else remember seeing this image and if so where is it please or could you post it please...? I told a mate of mine about what I had seen and he remains unconvinced, hence I want to prove it does really exist...!

Thanks in advance.

It was the MBD one

On scooter centre's Facebook page

Kegra did one,a jl1 inside a vw clubman. Expensive but neat.

Hiya mate,
Are you referring to the pic of the test exhaust on your scoot..?

What I'm referring to is a cad sectional drawing that I deffo saw somewhere, you could see how they had squeezed the tuned length of an expansion into the cavity of the Clubman box, no dimensions or anyhting just an image. Explained this to Hippy Jerry and he's DYING to see it...!

Any ideas anyone...?

Saw this exhaust at Belgium, its well made, got a few clever design features and is the best of the new bunch of expansion "Clubmans" IMHO.
Its like a new arms race ........

Popped the images onto your Facebook page Dave

soullad wrote:Saw this exhaust at Belgium, its well made, got a few clever design features and is the best of the new bunch of expansion "Clubmans" IMHO.
Its like a new arms race ........

You mean the MB one Ian?

yes Mike, sorry for the slow reply.
The box section was significantly bigger in cross sectional area than a standard Clubman, had slip joints at the engine mounting bolt points, which may allow it to be dropped without removing the right rear runner. The bonus of the exhaust slip joint is obvious.
It fulfils the design criteria but how does it perform?

soullad wrote:yes Mike, sorry for the slow reply.

Slow??

soullad wrote:It fulfils the design criteria but how does it perform?

Very well by the looks of this...
http://www.lambrettaspares.com/info/lam ... n-+38.html

Available in about a month...