Page 1 of 1
Mugello 200 28phbh jetting help.
Posted: Fri Jun 15, 2012 9:38 am
by scoot gp
Bought a 28phbh to replace my 25phbh, will be runing a standard mugello 200, clubman pipe and a 28phbh with a ram air filter.
Does anyone have the same setup and could point me in the right direction for jetting please?
Re: Mugello 200 28phbh jetting help.
Posted: Fri Jun 15, 2012 11:24 am
by jonnyb
You could try the jetting that I use on my 30mm Mugello V4 200 as a starting point, it should be a tad rich which wouldnt be a bad thing?
AV264 X13 second from top clip 45 slide 120 main 53 pilot.
I'm sure someone who has the same setup as you will be along soon
Re: Mugello 200 28phbh jetting help.
Posted: Sat Jun 16, 2012 7:40 am
by scoot gp
Thanks, it's only so I can get it running somewere neat before getting dyno'd
Re: Mugello 200 28phbh jetting help.
Posted: Sat Jun 16, 2012 7:45 am
by Special X
jonnyb wrote:You could try the jetting that I use on my 30mm Mugello V4 200 as a starting point, it should be a tad rich which wouldnt be a bad thing?
AV264 X13 second from top clip 45 slide 120 main 53 pilot.
I'm sure someone who has the same setup as you will be along soon
Take the main to 115 and you'l be in the ballpark for a PHBH 28.
Re: Mugello 200 28phbh jetting help.
Posted: Sun Jun 17, 2012 11:25 pm
by mickdale
jonnyb wrote:You could try the jetting that I use on my 30mm Mugello V4 200 as a starting point, it should be a tad rich which wouldnt be a bad thing?
AV264 X13 second from top clip 45 slide 120 main 53 pilot.
I'm sure someone who has the same setup as you will be along soon
hello jonnyb
can you tell me what filter you use if at all?
cheers
mick