to get around some exhaust clearance issues i'm going to fit a sidestand. the frame is already painted so ideally it will involve no welding.
what type are you running?
which sidestand for a Lambretta?
-
Fireman Ash
- registered user
- Posts: 123
- Joined: Wed Feb 04, 2009 2:29 pm
- Contact:
Which exhaust have you got buddy? I had nightmares with an AF 42mm from Rayspeed on my spanish Ser.80 Jet which I ended up selling on. Took stand off and dry bent very carefully, enough to clear a new Ancillotti sito which was ever so slightly narrower....I considered a side stand but only the ones that you can bolt onto the existing stand to avoid drilling the legshields. Good luck!!
Cheers
Ash
Cheers
Ash
-
Dazza
- Posts: 534
- Joined: Wed Jan 07, 2009 8:48 pm
- Main scooter: S3 LI Rapido 225
- Location: Newark on Trent
- Contact:
I had to finely fettle a scootrs with a lump hammer to get it clear my rear strut when fitted to a mugello 
It was impossible to fit with the standard barrel, maybe just a bad one?
It was impossible to fit with the standard barrel, maybe just a bad one?
If it aint broke.........tinker with it.....
Dryballs wrote:Some clown is selling this one on the bay...
http://cgi.ebay.co.uk/Lambretta-Chrome- ... 240%3A1318
coming for a spin sunday?really you need to streanghten the strut with these stands or fit them to the rear one
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm