mikuni jetting
Posted: Sun Apr 12, 2009 9:52 pm
running tm24 with mugello 186 /42mm af clubman
jetting today and current set up is
180 main
20 pilot
5n13 needle 2nd clip
air screw out 2 1/4 turns out
still running slightly boggy at low revs would this be due to the pilot i have a 17.5 and a 15 would it be ok to go smaller or would it be anything to do with air mixture
thanks Terry
jetting today and current set up is
180 main
20 pilot
5n13 needle 2nd clip
air screw out 2 1/4 turns out
still running slightly boggy at low revs would this be due to the pilot i have a 17.5 and a 15 would it be ok to go smaller or would it be anything to do with air mixture
thanks Terry