Scooterotica

Hello Guys,
which master cylinders are you using with a PM double disk brake?
Would the Nissin one for the ScootRS hydraulic lightswicht housing do the job?
Thanks! :smug:

Stampede wrote:Hello Guys,
which master cylinders are you using with a PM double disk brake?
Would the Nissin one for the ScootRS hydraulic lightswicht housing do the job?
Thanks! :smug:

Hi,if i was doing this i'd buy a front gilera runner master cylinder from ebay for about £20 then weld it to my original front brake housing,looks neater and the lever won't rattle ,friend of mine has this conversion and it looks the business.

Dean

Stampede wrote:Hello Guys,
which master cylinders are you using with a PM double disk brake?
Would the Nissin one for the ScootRS hydraulic lightswicht housing do the job?
Thanks! :smug:

Frank Sanderson told me the Nissin/ScootRS one would be fine; so seeing as it's readily available and a reasonable price, that's what I went for.

Hi
Ive been using the ScootRS master cylinder without any dramas.

Peugeot speedfight or do a search for AJP masters

italjet dragster one (AJP) MATED to scoor rs support which needed grinding back to suit the smaller clamp radius

Tom Russell wrote:

Stampede wrote:Hello Guys,
which master cylinders are you using with a PM double disk brake?
Would the Nissin one for the ScootRS hydraulic lightswicht housing do the job?
Thanks! :smug:

Frank Sanderson told me the Nissin/ScootRS one would be fine; so seeing as it's readily available and a reasonable price, that's what I went for.

x 2. Straight bolt on swap with the original.

Thanks, will go for the ScootRS one!