Im slowly but surely getting a S2 back on the road
The motor went off to JB Tuning for rebuild and a Monza 225 top end and JL3
Ive only fired the motor up and let it idle twice since getting it back but ive noticed an oil leak from exhaust stub and a fair bit of white exhaust smoke
Any idead folks
Leak
-
Stinky Finga
- registered user
- Posts: 67
- Joined: Tue Mar 22, 2011 11:45 am
- Xbox live gamer tag: ST1NKY F1NGA
- Playstation gamer tag: shamoane
- Main scooter: Series 2 230 MONZA
- Location: Heathrow
- Contact:
-
col68
- registered user
- Posts: 118
- Joined: Sun Oct 30, 2011 9:36 am
- Main scooter: lambretta s2 li225 ts1
- Location: Spalding,lincolnshire
- Contact:
when a new engine is done a all new part are dry when my mate does my new top end he puts alot of two stroke oil on the internal parts but it soon burns off :anbrgin; . if it keeps doing could be drive side seal if it is i would think your plug would be black and oily not just wet. on the exhaust manifold take it off clean up and put some high temp silicone on all surfaces leave 24 hours to set should sort it :fb: