early casings with no recess foir oil thrower washer

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Post Reply Previous topicNext topic
doggbhoy
registered user
Posts: 140
Joined: Wed Jan 07, 2009 9:42 pm
Location: Ayrshire
Contact:
Contact doggbhoy

hi all :)
i am doing a engine rebuild for a friend as his casing is cracked.... the casing i have to replace the damaged one is an early one as there is no recess for the oil thrower washer....
do i just rebuild without the washer and adjust rear sprocket to suit or not..???
appreciate all your help thanks :)
gabba gabba hey gabba we accept you one of us
Top
User avatar
RICSPEED
registered user
Posts: 3334
Joined: Sun Jan 04, 2009 11:30 pm
Location: YORK

the case you have will be a series 1 case .. i think you may have answered you own question .. but you could use a shim instead of thrower if you have problems
Its in bits scooter club: www.facebook.com/groups/132415046859320
Top
doggbhoy
registered user
Posts: 140
Joined: Wed Jan 07, 2009 9:42 pm
Location: Ayrshire
Contact:
Contact doggbhoy

hi ricspeed ,
thanks for your help :D
gabba gabba hey gabba we accept you one of us
Top
Robi D
registered user
Posts: 163
Joined: Thu Jan 29, 2009 9:08 pm
Location: Amherstburg, Ontario, Canada
Contact:
Contact Robi D

When I built my motor 4 or so years ago, we just put a chamfer in there and added the oil throw washer as it would be in a later case. No problems and been running it since.
Top
Post Reply Previous topicNext topic

Return to “Lambretta Tech”

  • Information

  • Who is online

    Users browsing this forum: Ahrefs [Bot], Google [Bot] and 24 guests

Powered by phpBB™ • Design by PlanetStyles