do i need a different exhaust
-
- registered user
- Posts: 321
- Joined: Thu Dec 03, 2009 8:11 pm
- Contact:
i have a ts1 225 with a jl3 exhaust and a 35mukuni carb with a 350 main jet and 55 needle on the 2nd clip changed the jetting to 320 main jet and a 57 needle on the 2nd clip. the scooter was a lot quicker off the mark but seemed to hit a brick wall lower down the speed range any ideas thanks
-
- registered user
- Posts: 321
- Joined: Thu Dec 03, 2009 8:11 pm
- Contact:
standard sx 200 gearbox amd sprockets. when it had the 350 jet it was running slightly rich thats why i was told to down size
-
- registered user
- Posts: 118
- Joined: Sun Oct 30, 2011 9:36 am
- Main scooter: lambretta s2 li225 ts1
- Location: Spalding,lincolnshire
- Contact:
Have you had a look at carb set up on here that may help see what other's are doing . is timing at 17/18 . or go on a dyno replay scooters are good . scooterrotica got one to. or google lambretta gearing there's a place on there you can put gearing in gives you a chart .col