I am about to fit a disc set up to my T5 classic, got an LML headset bottom with Master cylinder mount but the throttle and gear tube supports are larger than the piaggio ones. It comes with sleeves/bushes to take up this gap however I have nothing to reference it to. Can anyone assist with photos/diagrams of how the sleeves are fitted, position, direction etc
Cheers
LML handlebar bushes
It wasnt me, a big boy did it and ran away
-
Bofs
- registered user
- Posts: 391
- Joined: Wed Jan 07, 2009 7:25 pm
- Main scooter: Zundapp Betta 500
- Location: Derry
- Contact:
Working on one right now, I`ll stick pics up shortly.
Muffspeed....no muff too tuff
Bad Samaritans SC
1957 Zundapp Betta 500 Auto
1966 Motovespa Sprint 210 Polossi
1960 Lambretta Cutdown 205 Project
Bad Samaritans SC
1957 Zundapp Betta 500 Auto
1966 Motovespa Sprint 210 Polossi
1960 Lambretta Cutdown 205 Project
Bofs wrote:Working on one right now, I`ll stick pics up shortly.
Cheers
It wasnt me, a big boy did it and ran away
-
Bofs
- registered user
- Posts: 391
- Joined: Wed Jan 07, 2009 7:25 pm
- Main scooter: Zundapp Betta 500
- Location: Derry
- Contact:
From what I can see there are 2 shaped bushes, they go on the inside of the inner supports, nearest the headlight. Looks like another goes on the outside nearest the gearchange. Hope the pics help. Gimme a shout if you need any more info.
Muffspeed....no muff too tuff
Bad Samaritans SC
1957 Zundapp Betta 500 Auto
1966 Motovespa Sprint 210 Polossi
1960 Lambretta Cutdown 205 Project
Bad Samaritans SC
1957 Zundapp Betta 500 Auto
1966 Motovespa Sprint 210 Polossi
1960 Lambretta Cutdown 205 Project
Thanks, I will have a go tonight and if (when) I have any problems I will come back for more info
It wasnt me, a big boy did it and ran away
cheers sorted now just the rest of the scooter to put back together
It wasnt me, a big boy did it and ran away