Scooterotica

Hi,

I'm rebuilding a vespa GL 150 and i can't connect the electrics because the wires on the flywheel don't match the ones on the scooterhelp site. I'd like to start from scratch don't know where to start.
How can i identify the different coils? Are the wires on my flywheel ok?

Help needed please!

http://www.scooterhelp.com/electrics/pa ... 1T.gl.html

Nobody? I found this electrical diagram and it matches my flywheel.

The problem is that i don't have a rectifier and battery. How should i isolate or redirect the cables that go to the rectifier and battery?