anyone know of a way of repairing a casing that the xmas tree bush has spun in?
cheers
mick
xmas tree bush spinning in casing
-
monkey boy
- registered user
- Posts: 106
- Joined: Tue Mar 17, 2009 9:38 pm
- Location: Staines,Middlesex
- Contact:
How loose is it??
Only thing I can think of is to try a new bush,dunno if it could be locktighted in or maybe one could have knurling machined on the outside of the bush.This would increase the outer diameter and would possibly give it some grip.
AL
Only thing I can think of is to try a new bush,dunno if it could be locktighted in or maybe one could have knurling machined on the outside of the bush.This would increase the outer diameter and would possibly give it some grip.
AL
I've had this on an indian casing, i cleaned it up and used jb weld .Not ideal but, done about 1500 miles since. With no probs.
fred
fred
thanks guys
will check it at work to see if its square to the endplate/layshaft bores
will check it at work to see if its square to the endplate/layshaft bores