Page 1 of 1
Thin ring/quality piston options for standard PX/Rally200?
Posted: Sun Apr 01, 2012 8:47 am
by vegansydney
What are my options for a quality PX/P/Rally 200 piston (1st oversize 66.7) with thin rings?
Grand Sport? Anything else?
Re: Thin ring/quality piston options for standard PX/Rally20
Posted: Sun Apr 01, 2012 2:42 pm
by cezeta
yes, harry barlow has his own piston that he uses for his stage 4 conversion
Re: Thin ring/quality piston options for standard PX/Rally20
Posted: Mon Apr 02, 2012 12:41 pm
by gaz_powell
Don`t Harrys pistons start at 68mm (210cc) ?
Re: Thin ring/quality piston options for standard PX/Rally20
Posted: Mon Apr 02, 2012 2:36 pm
by nicsar
vegansydney wrote:What are my options for a quality PX/P/Rally 200 piston (1st oversize 66.7) with thin rings?
Grand Sport? Anything else?
What else do you need? Cheap and quality dont go together.
Re: Thin ring/quality piston options for standard PX/Rally20
Posted: Wed Apr 04, 2012 9:58 pm
by cezeta
gaz_powell wrote:Don`t Harrys pistons start at 68mm (210cc) ?
not sure, he is not of the computer age so there is ltd info on his stuff.