Scooterotica

Just picked up an SX200 this week, and, overall, well happy with it
As always, there are a couple of things I want to change
One of these is to do with the carb..
It's a 30mm PHBH..
I'm not sure about the cylinder cc, but it has been worked on as there is a packing plate at the base of the barrel
It's also running an Ancilotti exhaust

Anyways, at the moment the carb is open mouthed, and I dont like this so want to fit a remote filter
my qustion is..
what will I have top do to the jetting?
at present it's..
130Main
40 slide
70 Choke
268 Atomiser
50 pilot

i know it's difficult not knowing what state of tune the barrel is in, but I'm working on finding out!

thanks

david

Have you got this sorted David?

Would it matter what size the barrel is? The exact same principles would apply if it was standard I would have thought. You'll probably have to come down on your jet size.

Timbo wrote:Have you got this sorted David?

Not yet, Tim