Scooterotica

The standard one with additional cones into box, read on another thread Goldeneye seems pleased with them, anyone running these and could give some feedback?
Cheers Baz.

I take it you mean the SIP Road?

I was running mine one a std 200, well xport raised 1mm and widened to ca.64% , ran better. It seemed to rev out further.
The Norwegian guys who did the Budapest-Bamako race were using these. One of them ran it on the dyno, together with a skimmed head it was making 3 more hp than with std pipe.

For 100€ its definately an upgrade worth the money.

Now I have it on my polossi and its working very well.

Thanks for the reply , sounds ideal, cheers

Good exhaust - fitted one to my Rally 200 Electronic, upjetted the carb to suit and have a deffo lift in performance, nice deeper sound and straight forward to fit. Recommended.

Defo on my shopping list!! Does a jump of 2 on the main sound about right on a standard set up?

Yep - that's exactly what I did + I run a standard drilled air filter.

Plugged chopped it a few times and got a good plug colour. Took it up to Brid at the end of last season and gave it a good thrashing up/down the motorway as well, also poodling around at different throttle positions, no probs at all.

Thanks for the info fella!

I've put one on a standard P200 and it's real bolt on performance. I found myself upjetting more than I thought I'd have to but as I say it's a real bolt on bit of kit.

ive got one too on a polini 208. everything else standard and it runs a 123 main jet.

paint is very thin so buy a can of satin bbq paint and build it up as thick as you can and it will not rust plus the thickness of the paint makes for a better sound....less tinny.

Yeah heard paint not so good , have one coming this week so will get it painted cheers.