Scooterotica

My frame struts are buckled out by 5mm I'd say on the kickstart side. Does anyone have /sell a tool / template to get them back in line?

you need to use your bodywork to line them up.and a straight edge right along all three struts.to be honest you can usually pull them by hand back in line if your talking about the rear one,the others need a special tool called a hammer

Any help?

The drawings are very interesting, do you have a full set (side elevation as well) ? If so could you send me a set ? Thanks...

Guide with measurements etc can be found here: http://www.vespa-t5.org/lambretta-stuff ... t-series3/

mick1 wrote:The drawings are very interesting, do you have a full set (side elevation as well) ? If so could you send me a set ? Thanks...

me too

Nice pics

I've posted them before but for those who can't be arsed to search Here theya re again. Now please copy and paste to a folder somewhere

Stop being a miserable tight git and copy them and post everyone out a copy

Train Driver wrote:Stop being a miserable tight git and copy them and post everyone out a copy

It's bad enough on WKFA without you stalking me over here