Frame struts
-
psychedelicropcircle
- registered user
- Posts: 525
- Joined: Fri Aug 06, 2010 2:03 pm
- Main scooter: Series 1 li150 1958
- Location: north of hadrians wall
- Contact:
My frame struts are buckled out by 5mm I'd say on the kickstart side. Does anyone have /sell a tool / template to get them back in line?
you need to use your bodywork to line them up.and a straight edge right along all three struts.to be honest you can usually pull them by hand back in line if your talking about the rear one,the others need a special tool called a hammer
-
vegansydney
- registered user
- Posts: 223
- Joined: Wed Jan 28, 2009 8:52 am
- Location: New York City
- Contact:
Guide with measurements etc can be found here: http://www.vespa-t5.org/lambretta-stuff ... t-series3/
mick1 wrote:The drawings are very interesting, do you have a full set (side elevation as well) ? If so could you send me a set ? Thanks...
me too
It wasnt me, a big boy did it and ran away
-
WINTERMODEL150
- registered user
- Posts: 436
- Joined: Sun Oct 17, 2010 5:31 pm
- Main scooter: lambretta ld auto
- Contact:
Nice pics
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
I've posted them before 
but for those who can't be arsed to search 
Here theya re again. Now please copy and paste to a folder somewhere
but for those who can't be arsed to search Here theya re again. Now please copy and paste to a folder somewhere Compact Toolbox Flywheel Holder
-
Train Driver
- registered user
- Posts: 604
- Joined: Wed Mar 11, 2009 11:32 am
- Location: PE31 8PT (Posh bit of Norfolk)
- Contact:
Stop being a miserable tight git and copy them and post everyone out a copy
TS1 and PX stay in the garage (future barn finds) out on the GTS 300 when I go out on a scooter.
I know I’ll get there and back
I know I’ll get there and back
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
It's bad enough on WKFA without you stalking me over hereTrain Driver wrote:Stop being a miserable tight git and copy them and post everyone out a copy
Compact Toolbox Flywheel Holder