I know the jjh needle is commonly used bit is that just on a reed motor?
Cheers
BGM/koso 28 carb
-
soosh
- registered user
- Posts: 1106
- Joined: Sun May 03, 2009 2:01 pm
- Main scooter: GP RS200 Iron barrel
- Contact:
I've got a couple of these kicking around,I've sorted the fuel issues out now and want to try on my on my tuned Indian barrel.Anyone got a tried and tested spec for both bigbore and expansion.
I know the jjh needle is commonly used bit is that just on a reed motor?
Cheers
I know the jjh needle is commonly used bit is that just on a reed motor?
Cheers
-
coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
My experience has been with the OKO pwk and I found that the GJH needle worked better than the JJH which tended to be boggy in the mid range. The GJH is slightly weaker between 1/2 to 3/4 throttle so runs cleaner.
-
soosh
- registered user
- Posts: 1106
- Joined: Sun May 03, 2009 2:01 pm
- Main scooter: GP RS200 Iron barrel
- Contact:
Cheers,what motor was it on? What about the test of carb spec?coaster wrote:My experience has been with the OKO pwk and I found that the GJH needle worked better than the JJH which tended to be boggy in the mid range. The GJH is slightly weaker between 1/2 to 3/4 throttle so runs cleaner.
Thanks