PK forks in an SS90
Posted: Wed Dec 07, 2011 9:45 pm
What sort of job is it to fit them so I can fit an hydraulic brake?
Straight in.
Front mudguard takes some 'fetteling' and fork stem modifying if you want to use a steering lock.
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
PK forks in an SS90
Page 1 of 1
Re: PK forks in an SS90
Posted: Thu Dec 08, 2011 9:30 am
Re: PK forks in an SS90
Posted: Thu Dec 08, 2011 8:22 pm
Thanks for that,I presume the mudguard hole will need squareing to fit the stem and the leg bracket altering which shouldn't be a problem.
Re: PK forks in an SS90
Posted: Thu Dec 08, 2011 10:38 pm
...you need the pk -xl forks with the larger spindle and swinging arm...they go straight in same bearings and length...you'll need to modify the steering lock cut out...and as stated mudguards gunna need a bit of fettlin'...
have a look at proboards small frame forum...don't know how to show a link
there's loads of knowledge on there....
what you up to now?
have a look at proboards small frame forum...don't know how to show a link
there's loads of knowledge on there....what you up to now?
Re: PK forks in an SS90
Posted: Fri Dec 09, 2011 2:39 pm
pk125 forks are what you want if you are fitting a disc, stay clear of xl2 forks as these are threaded all the way up like a t5 so you will need to fettle them of weld on a different stem
have a look here http://davedaniel.proboards.com/index.cgi?
have a look here http://davedaniel.proboards.com/index.cgi?