Page 1 of 1
18mm small end Monza pistons
Posted: Tue Nov 15, 2011 10:39 am
by lozmondo
Looking for advice/options/opinions on a 70mm piston for a Monza barrel with an 18mm gudgeon pin/ small end.
Im aware of the YZ250, anyone used anything else ? don't want to go down the route of re pegging
Cheers
Re: 18mm small end Monza pistons
Posted: Wed Nov 16, 2011 12:03 am
by OzOAP
Are pegs in wrong place on the YZ?
Re: 18mm small end Monza pistons
Posted: Wed Nov 16, 2011 12:59 am
by RICSPEED
yes
Re: 18mm small end Monza pistons
Posted: Wed Nov 16, 2011 1:21 am
by soullad
kx 250
Re: 18mm small end Monza pistons
Posted: Fri Nov 18, 2011 11:35 am
by the-brickie
RM250
On second thoughts they might be 71mm..
Re: 18mm small end Monza pistons
Posted: Fri Nov 18, 2011 8:39 pm
by jonny snatchsniffer
nah the rm 250 is 70mm up to 1986 then from 87 they are 67mm