Scooterotica

i'm in the position to help a mate out with his 225 mugello. he's got it set up with a 4 plate clutch and monster springs and no slipping, but it's a pain to pull. i'm looking at using a deeper spider ala foxhat but would like some advice on steels and cork combinations that work, etc. what are you running that's a cheap, easy to pull, and doesn't slip.

cheers.

I ran my Stage 5 Muggy 225 on a standard 4 plate set up for 5 years untouched. Never had a problem, but I'm not sure what to do when it goes back together.

fit yamaha dtr 125 springs nice and easy to pull in and wont slip on motors upto 20bhp

thanks for the replies.
looks like i'm gonna try different springs and see what i come up with.
cheers for that.