Indian gearbox shims
Posted: Wed Nov 02, 2011 12:26 pm
Are they ok to use?
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
Indian gearbox shims
Page 1 of 1
Re: Indian gearbox shims
Posted: Wed Nov 02, 2011 2:46 pm
No issues with the ones from Scooter Restorations
Re: Indian gearbox shims
Posted: Wed Nov 02, 2011 3:11 pm
They are exactly the same as Italian imo
Re: Indian gearbox shims
Posted: Wed Nov 02, 2011 4:45 pm
I wouldn't rely on them always being the size advertised. I went through a box of them recently, all apparently the same size, but when measured they were all different. If you are after a perfect fit I'd go to your local dealer with your measuring stick and measure each one until you find the one you want.
Re: Indian gearbox shims
Posted: Thu Nov 03, 2011 12:41 pm
eerr, my local dealer is about 5000kms away... 
http://maps.google.com.au/maps?rls=com. ... CDAQ-A8wAA
http://maps.google.com.au/maps?rls=com. ... CDAQ-A8wAA
Re: Indian gearbox shims
Posted: Thu Nov 03, 2011 1:35 pm
Ha. I'm sure they will measure it before they send it . Besides its only an issue if you a fussy feck like me
. Besides its only an issue if you a fussy feck like meRe: Indian gearbox shims
Posted: Fri Nov 04, 2011 12:07 am
MBD or Scooter Restorations.......
Re: Indian gearbox shims
Posted: Fri Nov 04, 2011 11:18 pm
The Coke tin ones are not much cop
Re: Indian gearbox shims
Posted: Fri Nov 04, 2011 11:19 pm
i have never seen coke can ones from india only thai or viet