Curly exhausts?
-
psychedelicropcircle
- registered user
- Posts: 525
- Joined: Fri Aug 06, 2010 2:03 pm
- Main scooter: Series 1 li150 1958
- Location: north of hadrians wall
- Contact:
The tailpipe of my ancillotti disappeared on the way to brid. I was thinking about buying a snail type exhaust but have no experience of them. Are they quieter that clubmans? I'm running an imola 186 dellorto carb.
-
Monty
- registered user
- Posts: 472
- Joined: Wed Jan 07, 2009 7:21 pm
- Main scooter: Series 1 Muggy, Imola Special
- Location: STOCKPORT
- Contact:
I have a JL curly on my series 1 muggy. It replaced an Ancillotti. The best thing I ever fitted, revs out far more and its a lot quieter than the JL on my Imola setup, and a lot better than the Ancillotti. I did have to modify the flywheel side foot board as the part that drops down in front of the fan touched the pipe and had to be adjusted with a big hammer
-
psychedelicropcircle
- registered user
- Posts: 525
- Joined: Fri Aug 06, 2010 2:03 pm
- Main scooter: Series 1 li150 1958
- Location: north of hadrians wall
- Contact:
Monty wrote:I have a JL curly on my series 1 muggy. It replaced an Ancillotti. The best thing I ever fitted, revs out far more and its a lot quieter than the JL on my Imola setup, and a lot better than the Ancillotti. I did have to modify the flywheel side foot board as the part that drops down in front of the fan touched the pipe and had to be adjusted with a big hammer
Any chance you'd have a photo of the kickstart side as I'd be fitting to a s1 also.
Regards Scott