Scooterotica

I need to replace my worn out ignition switch on my 6v DC,TV200 found this NOS Grabor one (well it says Grabor on the keys) but the wires don`t seem to match up, the switch has the usual positions i:e parking light 1 click to the left, off and 3 positions to the right, ignore the araldite I just put this where the wires come out to re-inforce them, wires are 2 greens in one terminal, 1 grey, 1 purple and one orange, any ideas what this switch is? sorry for the quality of the pics . Nobody on the "other forum" seems to have an answer.

Most likely from a Lambro and not a straight swap for the standard Lambretta. If it's just the barrel/key worn on the original TV one get Jem Booth to transfer it's internals into the body of that one.

Hmmm. thats what I was afraid of, it seems a shame to take apart a good original Grabor switch though, even if it is for a Lambro.

TS1-200 wrote:it seems a shame to take apart a good original Grabor switch though, even if it is for a Lambro.

Agree, it would be a shame, but if you sell it (normally go for £30 - £40) on ebay, it'll be back on there as a NOS TV/SX/GP one for £130+.