Page 1 of 1
RB20 jetting
Posted: Sun Mar 22, 2009 10:26 pm
by ArKaTxU
Hi.
Can you tell me your RB20 jetting details.
Is for a RB20 with a Mikuni TMX35, and a Franspeed JL Road exhaust.
I want to put the carb with a foam filter under the panel.
Thanks!
Re: RB20 jetting
Posted: Mon Mar 23, 2009 2:16 pm
by RinB
Still a bit young this kit
But Id suggest starting point jet it like a ts1
Smiffy
Re: RB20 jetting
Posted: Mon Mar 23, 2009 2:33 pm
by ArKaTxU
RinB wrote:Still a bit young this kit
But Id suggest starting point jet it like a ts1
Smiffy
Yes, ok.
Then, feel free to put your specs with TS1, Mikuni TMX35 and the Franspeed Road exhaust.
Thanks.
Re: RB20 jetting
Posted: Mon Mar 23, 2009 6:15 pm
by corrado
Here's one from elsewhere...
ts1 225
jl3 exhaust
320 main
20 pilot(may try a 22.5 as it takes a while for mine to return to idle)
56 needle 2nd clip down(from top)
1 1/2 turns out on mixture screw