PX200 acting like clutch-seal is broken, but it's not...
Posted: Thu Aug 18, 2011 11:14 am
Hi everyone!
I'm running this specs;
PX200 casings and gearbox
Malossi 211 + MMW head
S&S 60mm crank
S&S reed
S&S clutch
Vespatronic (24-17
Pipedesign Charger
But suddenly the scooter behaves like the clutch-seal is broken. (easy going when cold, but when warm it splutters and hardly doesn't go at all)
When I checked the gear-oil yeasterday, it was nice and fine, without any trace of petrol.
The sealing on the flywheel side is checked and found to be ok.
Why does my scooter suddenly act like this?
Rgrds,
Øyvind
I'm running this specs;
PX200 casings and gearbox
Malossi 211 + MMW head
S&S 60mm crank
S&S reed
S&S clutch
Vespatronic (24-17
Pipedesign Charger
But suddenly the scooter behaves like the clutch-seal is broken. (easy going when cold, but when warm it splutters and hardly doesn't go at all)
When I checked the gear-oil yeasterday, it was nice and fine, without any trace of petrol.
The sealing on the flywheel side is checked and found to be ok.
Why does my scooter suddenly act like this?
Rgrds,
Øyvind