Scooterotica

I didn't get any with the shock.

Anyone got them that they could email?

What's your email address Bilko?

[email protected]

Thanks Mike

PDF sent

For the benefit of others TBH the instructions are too complicated, so I, and many others just set the rebound with about and inch of thread at the top of the spring and set the compression on the middle click, tighten or loosen the spring for a harder/softer feel.

Thanks Mike.

soulsurfer wrote:PDF sent

For the benefit of others TBH the instructions are too complicated, so I, and many others just set the rebound with about and inch of thread at the top of the spring and set the compression on the middle click, tighten or loosen the spring for a harder/softer feel.

Are your instructions for the first ones or the later ones with the extra adjustment? If its the earlier can you mail me a copy as well....please [email protected] ta

sydduckett wrote:

soulsurfer wrote:PDF sent

For the benefit of others TBH the instructions are too complicated, so I, and many others just set the rebound with about and inch of thread at the top of the spring and set the compression on the middle click, tighten or loosen the spring for a harder/softer feel.

Are your instructions for the first ones or the later ones with the extra adjustment? If its the earlier can you mail me a copy as well....please [email protected] ta

Dunno, but sent anyway

When you say extra adjustment, do you mean 40 clicks for rebound instead of 16?

soulsurfer wrote:PDF sent

For the benefit of others TBH the instructions are too complicated, so I, and many others just set the rebound with about and inch of thread at the top of the spring and set the compression on the middle click, tighten or loosen the spring for a harder/softer feel.

Hi Guys,

Did this setup method work out to be ok?
As per previous thread I received no instructions, 1’’ exposed thread seems like a lot of compression?

thanks

Also at http://jet200.com/catalog/product_manuals.php if you don't want to download.