Page 1 of 2

Series 2 leggy tool box

Posted: Tue Aug 02, 2011 9:19 pm
by battlam
Im after a decent leggy tool box for my series 2's. They all look much of a muchness. There's one on page 42 bottom left corner of scootering this month....

Who sells them and what is the best in your opinions???

Thanks

Re: Series 2 leggy tool box

Posted: Tue Aug 02, 2011 10:55 pm
by Andy Pickering
Not sure of the type but there's one for sale on lcgb chaps..

Re: Series 2 leggy tool box

Posted: Wed Aug 03, 2011 6:22 am
by Toddy
I 've had a couple of Buzzsolomoto for Series 2's good fit as well :D

Re: Series 2 leggy tool box

Posted: Wed Aug 03, 2011 7:02 am
by soulsurfer
I'm hoping to modify one of these to fit http://scootrs.com/moreinfo.cfm?Product_ID=132 which looks like the one seen in Scootering. I did one on my S3.

Eden, are you & I on the same mission, I think I'm a month or two ahead of you, let me know if you need any info, although Ian is very good ;-)

Re: Series 2 leggy tool box

Posted: Wed Aug 03, 2011 7:38 am
by soulsurfer
eden wrote:
soulsurfer wrote:I

Eden, are you & I on the same mission, I think I'm a month or two ahead of you

It's a whole new world :? :lol:
Very true, I've only ever had Series 3, and now a Series 2 which has so many unique features it can blow your mind, especially if your missing parts :freak:

Re: Series 2 leggy tool box

Posted: Wed Aug 03, 2011 9:50 am
by RICSPEED
soulsurfer wrote:I'm hoping to modify one of these to fit http://scootrs.com/moreinfo.cfm?Product_ID=132 which looks like the one seen in Scootering. I did one on my S3.

Eden, are you & I on the same mission, I think I'm a month or two ahead of you, let me know if you need any info, although Ian is very good ;-)

i have seen these and they are not to bad ,they do need a bit of work though but far better than the stange px style ones they did

Re: Series 2 leggy tool box

Posted: Wed Aug 03, 2011 9:50 am
by Tommy Boy
I got one like this for my series 1 but a series 2 one, not a GP one like in this listing (and I don't think it was resurrection scooters).

Needed lots of fettling to fit what were I believe straight legshields. Fixings are at the lower horn casting bolts and a riveted bracket at the top (you have to drill the legshields inside the horncasting). Came with all fixings, locks an keys and is cavenous!

Will post some photos if your interested.

Re: Series 2 leggy tool box

Posted: Wed Aug 03, 2011 9:56 am
by RICSPEED
Tommy Boy wrote: Will post some photos if your interested.
go ahead mate i'm sure it will be appreciated :D

Re: Series 2 leggy tool box

Posted: Wed Aug 03, 2011 2:50 pm
by Donnie
battlam wrote:Im after a decent leggy tool box for my series 2's. They all look much of a muchness. There's one on page 42 bottom left corner of scootering this month....

Who sells them and what is the best in your opinions???

Thanks

You need one of these mate :-)

Image

Re: Series 2 leggy tool box

Posted: Wed Aug 03, 2011 4:13 pm
by RICSPEED
pizza oven :lol: