Page 1 of 2
Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 3:04 pm
by teamsequipe
Hi Guys,
Anyone know where I can obtain allen key studs suitable for Lambretta chaincase ? Not talking about the bolts, but studs with an allen key hole for easy insertion........... oooerrr missus !
Ta muchly,
DM
Re: Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 3:39 pm
by soulsurfer
You mean long grub screws?
Re: Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 3:42 pm
by tonydevon
so long as you know the thread, just try local fastners supplier, and buy grubscrews of the right thread and length, ie m6 or m8 x whatever length it is you need
or an easy way to wind studs in is to put a dome nut on it, this bottoms out and will turn the stud in, or 2 nuts locked together.
DOH must type faster, there wasnt a reply when I clicked to reply, fat fingers and single key typing isnt the fastest LOL
Re: Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 3:53 pm
by teamsequipe
Thanks Guys, yeah I suppose that grub screws will work nicely, it's only in case of emergency roadside repairs, normally I use the 2 nut method for winding in studs, but sometimes on the side of the road this isn't a practical solution.
Cheers
DM
Re: Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 3:56 pm
by Bilko
Re: Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 3:59 pm
by soulsurfer
How much?
I'd use the dome nut method
Re: Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 4:02 pm
by Bilko
I know, but it was the only ones I could find Mike.
Re: Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 4:15 pm
by leigh
not sure of quality but these look like they have allen heads
http://www.lambretta-teile.de/Stud-M6x3 ... gine-cover
Re: Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 4:22 pm
by Bilko
soulsurfer wrote:
How much?
I'd use the dome nut method
That's for 25 though not one.
Re: Allen key chaincase studs ?
Posted: Thu Jun 30, 2011 4:49 pm
by carlos fandango