Im trying to fit the rear brake pedal to my Gp but im having a major problem with the spring. I can get the pedal on with the spring but it is stopping the pedal fitting onto the spigot properly as its not sitting central.
What am i doing wrong and whats the best way to fit it, Stickys book is not very forthcoming either,
Help please
Fitting rear brake pedal spring
-
jason frost
- Dealer
- Posts: 485
- Joined: Wed Jan 07, 2009 11:45 am
- Contact:
Don`t know if it helped essexgp, but it helped me. Cheers
-
essexgp
- registered user
- Posts: 287
- Joined: Wed Jan 07, 2009 6:16 pm
- Main scooter: Indian Gp200 Indian Gp Cutdown
- Location: Canvey Island
- Contact:
In picture three it shows the spring sitting at an angle and that is what is stopping the pedal going on the spigot properly and yes it has helped, thanks Jason
-
jason frost
- Dealer
- Posts: 485
- Joined: Wed Jan 07, 2009 11:45 am
- Contact:
Some times it just needs a tap with a small hammeressexgp wrote:In picture three it shows the spring sitting at an angle and that is what is stopping the pedal going on the spigot properly and yes it has helped, thanks Jason
