MADSPEED PERFORMANCE No33 S2 PROJECT
-
MADSPEEDRB260
- registered user
- Posts: 305
- Joined: Mon Jul 26, 2010 11:28 pm
- Main scooter: lambretta gp200
- Contact:
Well iv just had the pc sorted so i thought id put the new Madspeed No33 project up let the work commence.
keeper or seller when done
live life your a long time dead
-
MADSPEEDRB260
- registered user
- Posts: 305
- Joined: Mon Jul 26, 2010 11:28 pm
- Main scooter: lambretta gp200
- Contact:
I'm doing this one for my mate Andy sorry pal lol 
-
MADSPEEDRB260
- registered user
- Posts: 305
- Joined: Mon Jul 26, 2010 11:28 pm
- Main scooter: lambretta gp200
- Contact:
-
Rotor
- registered user
- Posts: 59
- Joined: Sun Jan 22, 2012 5:02 pm
- Main scooter: 1960 S2 Italian
- Location: N'r Portsmouth
- Contact:
Bet you have a 2 -- 1 light switch as well (extra wire) good luck finding another if its faulty ! cost me £70 once I found one NOS, Looks like some one has shifted the coil up there and deleted the big green ressistor which would be fitted the other side? Prob has a Carrello head light too !
Paul
Paul
-
MADSPEEDRB260
- registered user
- Posts: 305
- Joined: Mon Jul 26, 2010 11:28 pm
- Main scooter: lambretta gp200
- Contact:
Well im no train spotter and it doesn't look like its ever been apart. All new parts will be BGM so no use to us with this resistor. ill put the photos on tomorrow showing the forks. hub. And wide wheels. Ps yes it is a ...Carrello head light
-
MADSPEEDRB260
- registered user
- Posts: 305
- Joined: Mon Jul 26, 2010 11:28 pm
- Main scooter: lambretta gp200
- Contact:
Right let's get started. 1st clean all the parts
Before.
And after....
Before.
And after.
Before.
And after....
Before.
And after.
-
MADSPEEDRB260
- registered user
- Posts: 305
- Joined: Mon Jul 26, 2010 11:28 pm
- Main scooter: lambretta gp200
- Contact:
Next let's do the Very fast RB20 engine out with the gold gearbox and bits and in with the new lol
