Small end bearing question
Posted: Mon May 23, 2011 8:19 am
What is an ideal clearance between wide small end bearing and piston, side to side?
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
Small end bearing question
Page 1 of 1
Re: Small end bearing question
Posted: Mon May 23, 2011 2:33 pm
Sorry mate cant concentrate on the question with that AVATAR....
Re: Small end bearing question
Posted: Mon May 23, 2011 7:35 pm
To quote 'Complete Spanner's book 1' page 81
There should be no more than 1mm space either side of the bearing/shim combination that you intend to fit.
There should be no more than 1mm space either side of the bearing/shim combination that you intend to fit.