Page 1 of 1
Vespa Smallframe Legshield Trim Tool
Posted: Thu Apr 28, 2011 11:39 am
by Bones
Hiya,
Does anyone have or know where I can buy, beg, steal or borrow a Legshield Beading Tool from????
The tool with the rollers that form the trim onto the legshield edge.
Thanks in advance!!
Re: Vespa Smallframe Legshield Trim Tool
Posted: Mon May 02, 2011 11:44 am
by Bofs
Re: Vespa Smallframe Legshield Trim Tool
Posted: Sun May 08, 2011 5:05 pm
by Bones
Currently out of stock!
Re: Vespa Smallframe Legshield Trim Tool
Posted: Sun May 08, 2011 5:20 pm
by mark
Re: Vespa Smallframe Legshield Trim Tool
Posted: Sun May 08, 2011 7:06 pm
by vesbrettas
where abouts are you
Re: Vespa Smallframe Legshield Trim Tool
Posted: Mon May 09, 2011 7:33 am
by Bones
Vesbrettas - Near Doncaster mate.
Re: Vespa Smallframe Legshield Trim Tool
Posted: Tue May 10, 2011 9:13 am
by Diablo
Posted yesterday bud
Re: Vespa Smallframe Legshield Trim Tool
Posted: Tue May 10, 2011 9:23 am
by Bones
Sweet..............Cheers Al.
Large beer for you mate when I next seeya!!
Re: Vespa Smallframe Legshield Trim Tool
Posted: Tue May 10, 2011 10:03 pm
by immylam
easiest way to put on trim, lots of grease and 3 pairs of hands - clip on side near top corner and clip on other straight edge and then slide the whole thing round until on top edge the original side you put on at the top corner will be the only bit not on at this pointand it is just a case of trying to open with a screwdriver carefully and edge on a mil at a time , clip in the loose straight edge at the bottom and work towards the top corner and the last bit will be somewhere near the indicator. Done 3 in the past few weeks and now perfected it , only problem is the very last bit to clip on leaves a 1 cm stress bloom but you'd have to look for it.
The trim tool seems to be as mythical as the Jam's Saturday's Kids Japanese import single I craved as a teenager , never actually saw it but always heard of someone who knew someone who had it, could it be the same with a trim tool?