Page 1 of 1
hydraulic brake hose on a series 2
Posted: Wed Apr 27, 2011 8:11 pm
by smoore-gt225
hi can anyone help me and tell me where to route the hose through the headset on a series 2 , is it best to go through where the throttle cable is?? (looks like it will interfere with the throttle)or would it be better to go through on the other side where the gear pulley is (original cable route) its all a bit tight in there
has anyone got any pictures or advise
cheers in advance
steve
Re: hydraulic brake hose on a series 2
Posted: Wed Apr 27, 2011 8:14 pm
by RICSPEED
seen it go throuh the bolt hole on a few
Re: hydraulic brake hose on a series 2
Posted: Wed Apr 27, 2011 8:38 pm
by camel
im rebuilding mine as we speak and saw what i did at the time,i ground some clearence near the throttle wheel on the headset clamp to give clearence for the braided hose,unfortunatly it cant be done in situ and needs to be planned before you put the headset on,as as previously said,i myself have seen it go through the bolt hole with the correct angled fitments,this save filing a groove in the headset botton thus keeping it origional
Re: hydraulic brake hose on a series 2
Posted: Wed Apr 27, 2011 8:44 pm
by jason frost
Re: hydraulic brake hose on a series 2
Posted: Wed Apr 27, 2011 8:47 pm
by mark
Re: hydraulic brake hose on a series 2
Posted: Wed Apr 27, 2011 9:20 pm
by smoore-gt225
thanks for replies i shall have a go at it on friday
cheers steve
Re: hydraulic brake hose on a series 2
Posted: Thu Apr 28, 2011 6:26 am
by Toddy
Jason thanks for that was looking at how to route on my Series 1 that looks spot on do you have any other internal pics or descriptions of what you did please ?
Re: hydraulic brake hose on a series 2
Posted: Thu Apr 28, 2011 5:22 pm
by jason frost
), jason frost did this originally and i just copied it 
cos its such a great idea