Re: LD CNC fan club
Posted: Thu Apr 28, 2011 9:25 am
sounds good, but like eden said just to let him post in dealer section
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
You, good sir, are far too reasonable to be on a scooter forum!it looks like it'll be a nice little product for the LD owners who want a more reliable ignition set up - assuming it goes up for sale.
I'd agree that it should have been posted in the Dealers section in the first place, I can't understand why there seems to be an objection to that.
I have a couple of times now and you still don't answer..scootRS.com wrote:
why not ask a friendly question first if curious about something?
Why O why keep starting thing's :freak: :freak: post your new ideas & products answer the questions quickscootRS.com wrote:Eden, could you show us one post of ours you've moved to the dealer section as an advert before, or moved anywhere? Then we can understand what you mean and make sure it never happens again, as we've never seen one moved before. Announcements we've always put in the dealer section already, same as anyone else, but fewer than others. Cheers.
Then the mob attacked:ScootRS.com wrote:Few here probably care much about LDs but the guys in the shop have the CNC fan done to finish off our upcoming Lambretta LD CDI (electronic ignition) kit.
Rich_T wrote:I guess they still haven't told you the plan 'cause that does not look like CNC to me.
every 8th fin you can see a concave face between the fin roots (not possible without 5 axis and I see not "step over" witness marks either).
SO, are we really to believe that this is a fully CNC machined fan? OR is it an original fan that has been pickled or electro-polished and cleaned up ready to make a copy tool from?
It's far better to be straight with your buying public.
Eden wrote:Your reply above suggests you just dont know what your talking about.
I trust in [Rich's] judgment as to whether that fan is CNC or not!
sydducket wrote:I think he is fibbing and using the wager ploy as a way of backing out
coaster wrote:it is obvious to anyone that the flywheel is a cast item which had been cleaned up on a lathe.
drunkmunkey6969 wrote:Two sides to every story. im reluctant to cave in to requests to ban. i feel i'd be bowing to lynch mob mentality. i always like to give everyone a free reign to respond.
i will offer not $1000 but only £50 from my personal pocket if he can show us a small batch of say 2 or 3 of these lovely flywheels being CNCd. That way everyone is a winner (except me...i lose £50).
In the meantime, anyone that wants to buy one of these lovely flywheel kits can see them on the ScootRS site.
Et voila, a CNC milled fan exactly as said. If anyone insanely still has doubts and wants to request more proof, it only costs £50 to play:ScootRS.com wrote:A moderator is a referee, not a partisan, and you, sir, are an example of a great moderator to everyone running a forum!
We accept and will post a video, hopefully tomorrow or the next. The item takes a long time to make, but we'll film a bit of making one. Later we'll have more done for our CDI kits.
Proceeds will go to a charity of the winner's choosing.